The most important thing in making jewelry boxes is the functionality and usability of the products.
When designing a jewelry box, it is important to consider the practicality of the internal practice, such as the thickness, height, and compartment size of the partition.
There are three ways to cover the inside of a jewelry box: the first is to attach a pull bag lock hook, the second is to put a circle of flannel around the mirror, and the last is to attach a flannel directly.
There are usually compartments in the box. Rings, earrings, buttons, watches, sundries, etc. can be placed in the compartments, according to the specific requirements of the guests. There are many compartments in the box, so be sure to pay attention to the thickness of the partition. The commonly used thickness is 3mm, 6mm, 9mm. The partition can be coated with velvet or painted.
When you put the velvet in the box, be sure to pay attention to the glue.
Also be careful when using hardware, it is best to use copper hardware to prevent rust.
Jewelry boxes with drawers pay attention to the gap between the drawers.They should not be too tight or too loose. They should be left about 1 mm.
Above is only the problem that needs attention when customizing jewelry packaging boxes. If you have any questions, please contact us.
